R-Ident Turnkey Receiver Systems

 

There are currently two basic types of 'turnkey' receiver systems. The BRX-6C and the BRX-6B. The unit's consist of a RX6 receiver a GSM Modem, terminal blocks for easy connection of power, a latching relay, a siren reset button and more all installed inside an easy to use box. R-IDENT receivers type RX4 can also be used in these units, please contact Colter for further details.

The boxes are configured remotely by dialing into the box using a remote PC/Laptop (running configuration software supplied by Colter) which is connected to a PSTN or GSM MODEM. They can also be configured locally using a special cable which plugs into the receiver unit mounted within the box.
433MHz RF Technology
Upto 200M read range
Portable solution
Siren built in
Can run from vehicle battery supply or own batteries
Integral GSM Modem
Remote messaging via SMS

 

BRX-6C Description:
Unit size 254mm (H) x 180mm (W) x 111mm (D)
Supply voltage 12Vdc or 24Vdc - nominal values, designed for vehicular useage
R-IDENT receiver used is type RX6C, but can also utilise RX4C
Read range upto 200M
Includes GSM Modem
Aerial remotely mounted 3dB gain type
Latching relay output for remote siren activation
Optional remotely mounted 'talking' siren
Unit designed for permanent installation within an office, vehicle etc.
For more details contact Colter
BRX-6B Description:
Unit size 386mm (H) x 286mm (W) x 130mm (D)
Supply voltage 12Vdc (min) to 32Vdc (max) / 100Vac (min) to 240Vac (max) (using mains adapter supplied)
Unit has internal batteries for portable use
Run time from internal batteries approximately 48 hours continuous useage
Battery recharge time approx 24 hours from flat battery to full capacity
R-IDENT receiver used is type RX6B, but can also utilise RX4B
Read range upto 150M
Includes GSM Modem
Aerial internally mounted
Includes integral siren
Unit is weather proof (however will not withstand immersion or submersion)
For more details contact Colter